Si no tienes el flash instalado: Descargar Flash

THREAD TWO PIECES STAINLESS STEEL BALL VALVE FIG.61

 

manual pdf manual pdf

Certificate ISO 9001  Certificate CE

Fig.83Fig.82Fig.80Fig.65Fig.62Fig.61Fig.60Fig.43Fig.42Fig.23AFig.15
THREAD TWO PIECES STAINLESS STEEL BALL VALVE FIG.61
APPLICATIONS:

Thread according DIN 259 / 2999

  • Vapor. Water. Oil. Gas. Air. Corrosive fluids (some). Slurries. Dry powdered materials.

DN: 10-80
BODY: Stainless steel. ASTM A351 CF8M
RACORD: Stainless steel. ASTM A351 CF8M
BALL: Stainless steel. ASTM A351 CF8M
SEALING RINGS: PTFE + Glass Fiber
AXIS: Stainless steel X2CrNiMo17-13-3. AISI 316
PACKING: PTFE + Glass Fiber
HANDLE: Stainless steel X2CrNi18-9. AISI 304
NUT: Stainless steel X2CrNi18-9. AISI 304
HANDLE COATING: PVC
GLAND: Stainless steel X2CrNi18-9. AISI 304
WASHER: Stainless steel X2CrNi18-9. AISI 304
GLUED

CHARACTERISTICS:


Ball valves are quarter-turn, and have a ball drilled elastic rotating seat, allowing direct circulation in the open position and cut the way where the ball is rotated 90° closing the duct.

It is recommended:

  • For driving and cutting service, without strangulation.
  • When you need quick opening.
  • For moderate temperatures (-10º to 180ºC).
  • When you need minimal resistance to movement.

Advantages:

  • Low cost. High capacity. Cutting Concrete. Movement in a straight line. Few Leak. It cleans by itself. Low maintenance. Does not require lubrication. Compact size. Low torque seals (pair).

THREAD TWO PIECES STAINLESS STEEL BALL VALVE FIG.61
1- BODY
2- RACORD
3- BALL
4- SEALING RINGS
5- AXIS
6- PACKING
7- HANDLE
8- NUT
9- HANDLE COATING
10- GLAND
11- WASHER
12- GLUED
13- STEM THRUST SEAL
C/ Villa de Madrid, 49 - 46988 Polígono Fuente del Jarro - Paterna (Valencia) Tl: 0034 96 134 57 18-Fax: 0034 96 132 13 38 - borja@bombasborja.com
Bombas Borja S.A.     site map     español     CA     xhtml     css